Timbren DR3500CA Rear Suspension Enhancement System is a heavy-duty suspension upgrade designed to improve load stability, reduce rear-end sagging, and provide additional support for Dodge RAM 3500 trucks during towing and hauling.
Featuring patented Aeon hollow rubber springs and an 8,600 lb rated spring capacity, this rear suspension kit automatically responds to changing loads and road conditions. It helps improve vehicle handling, reduce excessive swaying, and maintain a more level stance when transporting heavy cargo or towing trailers.
Unlike traditional air suspension systems, the Timbren DR3500CA requires no compressors, air lines, or pressure adjustments. Its maintenance-free construction and straightforward bolt-on installation make it a practical solution for truck owners seeking dependable suspension assistance.
Key Features and Benefits
-
8,600 lb Rated Spring Capacity: Provides substantial supplemental rear suspension support without increasing the vehicle’s factory-approved payload or towing capacity.
-
Patented Aeon Rubber Springs: Progressive hollow rubber springs automatically increase resistance as the suspension compresses under additional weight.
-
Reduces Rear-End Sagging: Helps minimize excessive suspension compression when carrying heavy cargo or towing trailers.
-
Improved Vehicle Stability: Designed to reduce excessive sway, body roll, and rocking during demanding hauling applications.
-
Automatic Load Adjustment: Rubber spring technology responds naturally to changing loads without requiring manual adjustments.
-
Improved Towing Control: Provides additional rear suspension support to help maintain more predictable handling while towing.
-
Comfortable Unloaded Ride: Designed with spring clearance that allows the factory suspension to operate normally when the truck is unloaded.
-
Maintenance-Free Operation: No air compressors, air lines, fittings, or regular pressure monitoring required.
-
Easy Bolt-On Installation: Uses existing factory mounting points with no drilling required for specified applications.
-
Durable Construction: Heavy-duty rubber springs and steel mounting brackets are designed for repeated compression and demanding conditions.
Advanced Progressive Spring Technology
The Timbren DR3500CA features patented Aeon hollow rubber springs that provide progressive resistance as vehicle load increases.
Unlike conventional suspension components that apply relatively constant resistance, Timbren’s progressive springs become firmer as additional weight compresses the rear suspension.
This technology allows the system to automatically adjust to changing cargo weights and road conditions.
When carrying heavier loads, the springs engage to provide supplemental support, helping reduce excessive suspension movement and improve vehicle stability.
The system is designed to complement the truck’s original suspension rather than replace the factory springs or shock absorbers.
Improved Towing and Hauling Stability
Transporting heavy equipment, carrying construction materials, or towing large trailers can place considerable demands on a pickup truck’s rear suspension.
Excessive rear-end sagging can affect vehicle balance, handling characteristics, and overall driving comfort.
The Timbren DR3500CA provides supplemental suspension resistance to help manage these conditions.
-
Helps reduce rear suspension sagging.
-
Improves resistance to body roll.
-
Reduces excessive side-to-side swaying.
-
Provides additional support when towing trailers.
-
Helps maintain a more level vehicle stance.
-
Cushions certain road shocks and impacts.
-
Supports more controlled handling under load.
Its progressive rubber spring construction makes it particularly useful for applications where cargo weight changes frequently.
Compatible Dodge RAM 3500 Trucks
The Timbren DR3500CA is designed for rear suspension installation on compatible Dodge RAM 3500 and RAM 3500 heavy-duty trucks.
Dodge RAM Compatibility
-
2003–2010 Dodge RAM 3500 Pickup
-
2003–2010 Dodge RAM 3500 Cab and Chassis
RAM Compatibility
-
2011–2025 RAM 3500 Pickup
-
2011–2025 RAM 3500 Cab and Chassis
The kit is designed for specified two-wheel-drive and four-wheel-drive configurations.
Important Fitment Information
Compatibility depends on the vehicle’s model year, suspension configuration, and factory equipment.
Always verify the exact vehicle application against the manufacturer’s fitment guide before purchasing or installing the kit.
Comfortable Ride When Unloaded
The Timbren DR3500CA is designed to provide additional suspension support primarily when the vehicle is carrying a load.
During unloaded driving, the rubber springs are intended to maintain clearance from the axle contact points, allowing the factory suspension to operate normally.
The recommended clearance is generally between 1/2 inch and 1 1/2 inches, depending on the vehicle and installation configuration.
As cargo weight increases, the rear suspension compresses and the rubber springs progressively engage.
This design helps balance everyday driving comfort with the additional support required for towing and hauling.
Maintenance-Free Suspension Performance
One of the main advantages of Timbren’s Suspension Enhancement System is its simple mechanical construction.
Unlike air helper spring systems, the DR3500CA does not require compressed air to provide supplemental suspension resistance.
-
No air compressor required
-
-
No manual pressure adjustments
-
-
No regular inflation or deflation
-
No electrical connections
-
Automatic response to changing loads
Once correctly installed, the system provides dependable rear suspension support without routine air pressure maintenance.
Easy DIY Installation
The Timbren DR3500CA features a vehicle-specific mounting design that uses existing factory suspension mounting locations.
The kit replaces the original rear bump stops with Timbren suspension enhancement assemblies.
Installation generally requires basic hand tools and does not involve drilling for the specified applications.
Kit Contents
-
Two patented Aeon hollow rubber spring assemblies
-
Two 1-inch rubber spacers
-
Two vehicle-specific steel mounting brackets
-
All necessary installation hardware
The included components work together to provide progressive rear suspension support without replacing the truck’s original suspension system.
Product Specifications
-
-
-
Product Type: Rear Suspension Enhancement System
-
Kit Classification: Standard Suspension Enhancement Kit
-
Installation Position: Rear
-
Vehicle Compatibility: Dodge RAM 3500 and RAM 3500
-
Compatible Model Years: 2003–2025 for specified applications
-
Drive Compatibility: 2WD and 4WD
-
Spring Technology: Patented Aeon Hollow Rubber Springs
-
Rated Spring Capacity: 8,600 lbs
-
-
Spring Material: Heavy-Duty Rubber Compound
-
-
Rubber Spacers: Two 1-Inch Spacers
-
Kit Height Without Spacer: Approximately 6.43 Inches
-
Kit Height With Spacer: Approximately 7.43 Inches
-
Installation Type: Bolt-On
-
Drilling Required: No for Specified Applications
-
Air Compressor Required: No
-
-
Maintenance: No Routine Air Pressure Maintenance
-
Mounting Hardware: Included
-
-
Warranty: Timbren Limited Lifetime Warranty
Important Load Capacity Information
The Timbren DR3500CA has an 8,600 lb rated spring capacity. This rating represents the supplemental suspension system’s capacity and does not increase the truck’s manufacturer-approved payload or towing capabilities.
Installing this kit does not increase the vehicle’s Gross Vehicle Weight Rating (GVWR), Gross Axle Weight Rating (GAWR), or other factory-established load limits.
All cargo, trailer tongue weight, and vehicle loads must remain within the manufacturer’s specified limits.
Ideal for Work Trucks and Heavy-Duty Applications
The Timbren DR3500CA provides practical suspension assistance for RAM 3500 owners who regularly transport heavy equipment or tow trailers.
Common applications include:
-
Heavy-duty trailer towing
-
Construction and landscaping equipment
-
Commercial cargo transportation
-
-
Recreational trailers and campers
-
Agricultural and farm equipment
-
Tools and heavy materials
-
General towing and hauling applications
Its automatic spring engagement makes it useful for trucks that alternate between unloaded everyday driving and demanding work conditions.
Reliable Rear Suspension Support
Timbren DR3500CA Rear Suspension Enhancement Kit combines patented Aeon rubber spring technology, an 8,600 lb rated spring capacity, and durable maintenance-free construction in one practical suspension upgrade.
Designed for compatible Dodge RAM 3500 and RAM 3500 trucks, the system helps reduce rear-end sagging, improve load stability, and minimize excessive sway and body roll during towing and hauling.
With its straightforward bolt-on installation, progressive spring response, and no air pressure maintenance requirements, the Timbren DR3500CA provides dependable supplemental suspension support while maintaining the vehicle’s original manufacturer-approved load ratings.
